How To Install Scorpion Exhausts

This example shows a typical installation of a Standard Mount Stainless Scorpion on a 2003 Suzuki SV650.

A special thanks goes out to Dennis Albrewczynski of Erie, PA for sending in these photos!

Here's the bike with the stock exhaust:

Step 1: Saw off the stock pipe about 1-3/4" above the weld.

Step 2: Attach the extension pipe provided.

Step 3: Attach the collector with provided brackets.

Here are a couple of shots of the finished product:

Reminders:

• You may need to use a small amount of silicone sealer on the joints.
• Make sure all bolts are tight and there is no interference with any moving parts.
• Re-tighten fasteners after your first ride.

Hopefully this guide will help YOU with your Do-It-Yourself Scorpion Exhaust installation.

Don't forget to send in your warranty card! You can get ONE half price replacement in case of impact damage. There's also the lifetime warranty for the original purchaser.

Get Scorpion Exhausts

Home >> Motorcycle Exhaust >> Install Scorpion Exhausts